Svenska
Cart
Your cart is empty, but doesn't have to be..
Follow these steps to apply your screen prints correctly:
1. Preparation:
- Pre-press your garment for a few seconds to remove any moisture.
2. Application:
- Temperature: Set the press to 160°C.
- Pressure: High
- Time: Press for 10-12 seconds.
- Remove the carrier while it is still warm.
3. Additional instructions:
- Use a heat press for application.
- All presses are different; test the settings to find what works best for your heat press.
- Wash the garment inside out without fabric softener to prolong the longevity of your print. Do not tumble dry.
Follow these steps to apply UV DTF on hard surfaces:
1. Preparation:
- Clean the surface thoroughly.
- Remove the white carrier.
2. Application:
- Affix the print onto a clean, hard surface. Ensure it is straight and does not adhere where it shouldn't, as it cannot be corrected afterwards.
- Rub the print firmly onto the surface.
- Then, peel off the clear plastic film.
3. Additional instructions:
- The product can be adhered to all hard surfaces except frosted glass.
- It is waterproof and permanent.
- Hand wash only, avoid soaking, and not dishwasher safe.
- Do not microwave.
- No heat press required.
- Wait 24 hours before use.
4. Tips:
- Measure your bottle or cup to ensure the print fits. If the measurements are not exact, you can cut the print to customize it to your design.
- If any air bubbles occur, try gently pressing them out towards the edge.
Follow these steps for optimal application of your Chenille patches:
1. Preparation:
- Pre-press your garment for a few seconds to remove any moisture.
2. Application:
- Place the patch in the desired location on the fabric.
- Cover the patch with a Teflon sheet to protect both the fabric and the patch.
- Temperature: Set the heat press to 190°C.
- Pressure: Medium/High
- Time: Press for 15-20 seconds.
3. Finishing:
- If possible, turn the fabric inside out and press for an additional 15 seconds for extra adhesion.
- Wash the garment inside out without fabric softener to prolong the longevity of your patch. Do not tumble dry.
4. Additional instructions:
- Use a heat press for the application.
- All presses are different; test the settings to find what works best for your heat press.
Your cart is empty, but doesn't have to be..